DCC Supplies
	Unit 17A, Top Barn Business Centre,  Worcester Road,  Holt Heath, Worcestershire , WR6 6NH
	0845 224 1601
INFO LAST CONFIRMED: 29th March 2012 UPDATE OUR DETAILS: [UPDATE] [Report a Broken Link] [Report this Supplier Closed]	Catalogue:	Online
	Worldwide Export: Yes
	Services offered by this Suppliers: Decoder Fitting Services,
	We offer a large range of the best in DCC manufacturers, an installation service, loco sounds, our own range of products (Including our LED's and speakers) plus all the major and minor items you'll need for DCC. Need help or advice? - Just ask! We're always pleased to answer questions by phone or email. New to DCC? Or thinking of changing from Analogue? Attend our series of workshops. Check our glossary for explanation of terms. We also stock Traditional DC control, plus a full component, wiring and tools; and for those evenings off, try our range of interesting books

Previous News Items -

24th November 2008 - 30% off with the Digitrax® National Display Program* !

DCC Supplies and Digitrax^® are offering clubs & exhibitors the opportunity to save 30%* off the full MSRP price of Digitrax^® equipment with the 'National Display Program'. There is no minimum or maximum order value, and club members are able to purchase additional equipment for their own use when it is included with the main order.

The offer is open to all bona-fide Clubs and layout exhibitors, who offer or organise open days, public demonstrations or exhibit at public events or participate in similar open attendance meetings/proceedings.

Clubs should contact DCC Supplies on 01905 621 999 or 0845 224 1601 or by Email info@dccsupplies.Comfor further details.

*Terms and conditions apply, full details available on request.

10th July 2007 - Postal Strike update; From DCC Supplies

Dear Customers, We would like to inform you of our arrangements during the 2nd Postal strike (Thursday 12th - Friday 13th):
Larger orders will be sent via UPS at no extra charge. Small orders received during that period will be posted on Monday the 16th July (via Recorded post/special delivery at no extra charge, to avoid any potential loss).
Also, our order cutoff time (currently 3pm) will be changed to 12:00 during strike days.

These arrangements will also be used during any further industrial action by the Post Office, we hope that these arrangements will help to minimise the inconvenience caused by the strikes.

Best regards
DCC Supplies Ltd.

26th April 2007 - DCC Supplies: Workshop schedule, 2007

DCC Supplies have finalised the dates for their 2007 DCC Workshops as follows:

Designing for DCC (DCC basics)---------------> Next date- SATURDAY 19th May 2007
DCC Decoder Fitting and Programming --------> Next date- SATURDAY 16th June 2007
Computer control Introduction. ---------------------> Next date - SATURDAY 21st July 2007

1st November 2006 - The DiGi-HAT, by DCC Supplies.

The easiest, and most professional solution to the DCC conversion of Graham-Farish Locomotives is now available from DCC Supplies Ltd. The difficulty in converting the old 'Poole' built units, as found in some diesel and most steam locos is the fact that the motor brush is built into the live chassis. There have been a number of attempts in the past to solve this problem, all involving a complete strip & modification to the chassis. The process is time consuming, and a little risky, damage could be incurred to the magnet, bearings, motor assembly etc. etc.
The DIGI-HAT is a direct replacement for the existing brass guide, and with the provided heat-shrink sleeve enables you to make an extremely professional job of a DCC conversion, better still, it only takes 5, rather than 45 minutes to convert a loco, and there is no drilling, additional materials, or irreversible modification required! All that is then needed, is a wire soldered to the exposed section of the clip, and fed through to the decoder. DCC Supplies provide the DiGi-Clip, a modified clip for those who wish to save even more time!

13th September 2006 - DCC Supplies now authorised distributors for Tony’s Trains products in Europe.

DCC Supplies are please to announce that they are authorised distributors for Tony’s Trains products in Europe. Spare parts, repairs and service of the CMX clean machine are always available, as are the RRAMP Meter, an accurate Volt & Amp meter for DCC, and all the other famous Tony’s products.<br />
The CMX track cleaner has been sold in the UK for some time now, as have other Tony’s trains products; they have not however, been supported by a UK based distributor until now. Full post sales support, repairs and spares are now available in the UK from DCC Supplies.

Other suppliers in Categories associated with this business:

KEY TO SUPPLIER INFORMATION & SYMBOLS:

=Website, =E-Mail, =Credit and Debit cards, =ePayments e.g. PayPal, =UK Mail Order Service.

As we hope you can appreciate the information given here is given in good faith but if you do spot an error or omission please let us know by using one of these options -
[UPDATE]      [Report a Broken Link]      [Report this Supplier Closed]